Hoover HLX C9TE-80 User Manual
![Hoover HLX C9TE-80 manual cover](/images/swhDPgzJdNVXItFAYabumlxm/thumbs/thumb175x175.webp)
To start a drying cycle, turn on the dryer, select the desired program using the program dial, adjust the drying settings if necessary, and press the start button.
Check if the dryer is properly plugged in and the circuit breaker is not tripped. Ensure that the lint filter is clean and the selected cycle is appropriate for heating. If the problem persists, consult the manual or contact customer service.
Open the dryer door, locate the lint filter at the bottom of the door opening, pull it out, and remove lint by hand or with a soft brush. Replace the filter before starting the next cycle.
The condenser unit should be cleaned at least once a month to ensure optimal performance. Remove it from the dryer and rinse it under running water until clean.
Ensure that the dryer is level and not overloaded. Check for any loose objects in the drum. If the noise continues, inspect for foreign objects in the filter or contact a technician.
Most fabrics can be dried, but delicate items may require specific settings or air drying. Check the garment label for drying instructions.
Refer to the user manual for specific error code meanings and troubleshooting steps. Common solutions include resetting the dryer or checking for blockages.
Regularly clean the lint filter and condenser unit, check the vent hose for blockages, and wipe the drum and door seal with a damp cloth.
Use full loads without overloading, select energy-saving cycles, ensure the lint filter is clean, and maintain proper ventilation for quick drying.
Check if the power supply is interrupted, ensure the door is properly closed, and that the water tank is not full. Restart the cycle if necessary.