Hoover HLSI 460PW-80 User Manual
![Hoover HLSI 460PW-80 manual cover](/images/rxFZGhwqJROZClFJnvUdmBaN/thumbs/thumb175x175.webp)
To reset the Hoover HLSI 460PW-80, press and hold the start button for approximately 3 seconds until the LED display shows a reset indication or the dishwasher beeps.
Check if the drain hose is kinked or clogged. Ensure the filter is clean and free of debris. If the problem persists, inspect the drain pump for obstructions.
Remove the bottom rack to access the filter. Twist the filter counterclockwise and lift it out. Rinse it under running water, removing any debris. Reinstall it by twisting it clockwise.
Ensure the door is fully closed and latched. Check if the dishwasher is properly plugged in and the circuit breaker is not tripped. Verify that the water supply is turned on.
Use a high-quality dishwasher detergent, either in powder, liquid, or pod form. Avoid using regular dish soap as it can cause excessive suds.
It's recommended to clean the spray arms every 3 months. Remove them and rinse under running water, using a toothpick to clear any clogged holes.
Yes, but ensure they are dishwasher-safe and placed on the top rack to avoid warping. Avoid placing lightweight plastic items on the bottom rack.
Regularly clean the filter, spray arms, and door seals. Use a dishwasher cleaner monthly to remove limescale and detergent buildup. Ensure proper loading to avoid overworking the machine.
Check the door seal for damage or debris. Ensure the dishwasher is level and not overloaded. Inspect the hoses and connections for leaks.
Make sure the spray arms can rotate freely and are not clogged. Use the correct amount of detergent and ensure the water temperature is at least 120°F (49°C). Avoid overloading the dishwasher.