Hoover HL C8LF-80 User Manual
![Hoover HL C8LF-80 manual cover](/images/YjYRFnHcLTppbAhCnxYTGtNw/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and locate the lint filter at the bottom of the door opening. Pull it out and remove any lint by hand or with a soft brush. Rinse it under warm water if necessary, then allow it to dry completely before reinserting it.
First, check if the dryer is plugged in and the circuit breaker is not tripped. Ensure the selected cycle includes heat. Clean the lint filter and check the exhaust vent for blockages. If the issue persists, contact customer service or a professional technician for further assistance.
To prevent wrinkles, promptly remove clothes from the dryer at the end of the cycle. Use the anti-crease option if available, and avoid overloading the dryer.
Regularly clean the lint filter, check and clean the exhaust vent, and ensure the drum is free of foreign objects. It's also recommended to periodically wipe the exterior and control panel with a damp cloth.
To reset the dryer, unplug it from the power source, wait for about 5 minutes, and then plug it back in. This should reset the control board.
The dryer may stop mid-cycle if the load is unbalanced, the lint filter is clogged, or the thermal fuse is tripped. Ensure the load is distributed evenly and the lint filter is clean. If the problem persists, a technician may need to check the thermal fuse or other components.
It is not recommended to dry shoes directly in the dryer as it can cause damage. Use a drying rack or a mesh bag designed for drying shoes, if available, and select a low heat setting.
Ensure the dryer is level and on a stable surface. Check for any loose items inside the drum and remove them. Tighten any loose screws or components on the dryer, and make sure the exhaust vent is not blocked.
The Hoover HL C8LF-80 dryer offers various cycles such as cotton, synthetics, delicates, and quick dry. Refer to the user manual for detailed descriptions and recommended usage for each cycle based on fabric type.
Place the dryer on a level surface, ensuring it is stable. Connect the exhaust vent to the dryer and ensure there are no blockages. Plug the dryer into a suitable electrical outlet. Consult the installation guide for specific instructions and safety precautions.