Hoover HIB1 6B2S3FS-80 User Manual
![Hoover HIB1 6B2S3FS-80 manual cover](/images/DjtcYrMMMGvAIxraQAxgCzXG/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes into the dishwasher, add detergent to the dispenser, select the desired wash program using the control panel, and press the start button.
Ensure the drain hose is not kinked or clogged. Check the filter and clean it if necessary. If the problem persists, verify that the kitchen sink drain is clear.
It's recommended to clean the filter every month to ensure optimal performance and to prevent clogs.
Use high-quality automatic dishwasher detergents. Avoid using regular dish soap as it can cause excessive sudsing.
Spots can be caused by hard water. Use a rinse aid to help mitigate this issue and ensure dishes are loaded properly to avoid water pooling.
It is generally not recommended to wash non-stick cookware in a dishwasher as it can damage the coating. Always refer to the manufacturer's care instructions.
To reset the dishwasher, press and hold the start button for about 3 seconds until the display shows a reset signal or turns off.
Check for obstructions around the door and door seal. Ensure that the racks are properly aligned and that dishes do not protrude.
Unusual noises may be caused by utensils or dishes touching the spray arms. Ensure items are securely placed and not obstructing the arms.
Ensure you are using a rinse aid and selecting the appropriate drying cycle. Check that the heating element is functioning properly.