Hoover HIB 5B2S3FS User Manual
![Hoover HIB 5B2S3FS manual cover](/images/rvRRrdjGiRdjZIXoGTOABFmf/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes, add detergent, select the desired program using the control panel, and press the Start button. Ensure the door is closed properly.
Ensure dishes are loaded correctly, not blocking the spray arms. Check and clean the filter, and make sure you're using the recommended detergent and rinse aid.
Check for any blockages in the sink drain or hose. Ensure the drain hose is not kinked, and clean the filter and pump for any debris.
It's recommended to clean the filter once a month to ensure optimal performance and to prevent clogs.
Error code E3 typically indicates a heating issue. Check if the water is heating during a cycle, and if not, inspect the heating element and thermostat.
Open the rinse aid dispenser cap and use a screwdriver to adjust the dial to the desired setting, typically between 1 (low) and 6 (high), depending on your water hardness.
Regularly clean the filter, check and clean spray arms, inspect the door gasket, and run an empty cycle with a dishwasher cleaner every few months.
To reset the dishwasher, press and hold the Start button for about 3 seconds until the appliance turns off. Wait a few minutes and then turn it back on.
Unusual noises may be due to improperly loaded dishes, loose items in the dishwasher, or debris in the spray arms or pump. Ensure everything is secure and clean.
No, regular dish soap can cause excessive suds and overflow. Always use dishwasher-specific detergent to avoid damage and ensure effective cleaning.