Hoover HFT 60 B User Manual

Pages 20

Year 2007

Language(s)

of 20

Hoover HFT 60 B Specification

The Hoover HFT 60 B is a chimney cooker hood designed to efficiently manage kitchen ventilation. It boasts a sleek stainless steel finish, providing both modern aesthetic appeal and durability. This model is engineered to perform at a high extraction rate of up to 450 cubic meters per hour, making it suitable for medium to large kitchens. The device operates with three speed settings, allowing users to adjust the ventilation power according to their cooking needs. The controls are user-friendly, consisting of simple push-button mechanisms for ease of operation.

The hood is equipped with two LED lights, which offer bright illumination over the cooking area while being energy-efficient. It includes a washable aluminum grease filter, which can be easily maintained to ensure optimal performance and longevity. The Hoover HFT 60 B supports both ducted and recirculating installation modes, providing flexibility based on kitchen setup and preferences. In recirculating mode, carbon filters can be installed to help neutralize odors and maintain air quality.

With a noise level of approximately 63 decibels at maximum speed, it ensures a relatively quiet operation compared to many other models in its category. The hood has a width of 60 centimeters, making it a suitable choice for standard-sized cooking areas. Designed to meet contemporary kitchen demands, the Hoover HFT 60 B combines functionality with style, making it a practical addition to any modern kitchen environment.

Hoover HFT 60 B F.A.Q.

How do I properly install the Hoover HFT 60 B?

Ensure the extractor hood is securely mounted on the wall. Use the appropriate screws and wall plugs for your wall type. Connect the ductwork securely to the ventilation outlet. Plug in the appliance to a suitable power outlet.

What should I do if the extractor fan is not working at all?

Check the power supply to ensure the appliance is plugged in and switched on. Verify that the circuit breaker has not tripped. If the problem persists, consult a qualified technician.

How often should I clean the filters on my Hoover HFT 60 B?

The grease filters should be cleaned every month to maintain optimal performance. If your model has charcoal filters, they should be replaced every 3 to 6 months.

What is the best way to clean the exterior of the extractor hood?

Use a soft, damp cloth with mild detergent to wipe down the exterior. Avoid using abrasive materials or harsh chemicals that may damage the finish.

How can I reduce the noise level of my Hoover HFT 60 B?

Ensure that the extractor hood is properly installed and all screws are tightened. Check that the ductwork is not obstructed. Using the lower fan speeds can also help reduce noise.

Why does my extractor hood have reduced airflow?

Check for obstructions in the ductwork or filters. Clean or replace filters as necessary. Ensure that the ducting is the correct size and length for optimal performance.

What should I do if there is a burning smell coming from the extractor hood?

Turn off the appliance immediately and unplug it. Check for any blockages or burnt residues in the filters or ductwork. If the issue persists, contact Hoover customer support.

How do I replace the light bulb in the Hoover HFT 60 B?

Ensure the appliance is unplugged. Remove the cover of the light fixture, unscrew the old bulb, and replace it with a new one of the same type and wattage. Reattach the cover securely.

Can I use the extractor hood without ducting it outside?

Yes, the Hoover HFT 60 B can be configured for recirculating mode. Ensure that charcoal filters are installed to effectively filter the air before it is recirculated back into the kitchen.

How do I reset the filter indicator light?

After cleaning or replacing the filters, press and hold the reset button for a few seconds until the indicator light goes off. This will reset the filter maintenance reminder.