Hoover HFLO3550E AU User Manual
![Hoover HFLO3550E AU manual cover](/images/VKESDpCYlsTAxobjFbbzSIjW/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Add detergent to the dispenser. Turn the program selector to choose your desired wash cycle. Press the 'Start/Pause' button to begin the cycle.
Ensure that the washer is plugged in and the power outlet is functioning. Check if the door is properly closed. Verify that the water supply is turned on and that the 'Start/Pause' button has been pressed.
To clean the detergent drawer, remove it by pulling it out and pressing down on the release mechanism. Rinse it under warm water to remove any residue and dry it thoroughly before reinserting.
Error code E03 indicates a draining issue. Check if the drain hose is kinked or blocked. Ensure the pump filter is clean. If the problem persists, contact a qualified technician.
It is recommended to clean the pump filter every month or after every 30 wash cycles to prevent blockages and ensure efficient operation.
Yes, you can wash wool garments using the dedicated wool program. Ensure that the wool items are labeled as machine washable. Use a detergent suitable for wool.
The maximum load capacity is 5.5 kg for cotton fabrics. For other materials, refer to the user manual for specific load recommendations.
To perform a drum clean, ensure the drum is empty. Select the 'Drum Clean' program and add a drum cleaning detergent if necessary. Run the cycle to maintain hygiene.
Excessive vibration can be caused by an imbalanced load. Ensure the machine is level and the laundry is evenly distributed. Avoid overloading the drum.
To deactivate the child lock, press and hold the 'Child Lock' button for three seconds. The indicator light will turn off, signaling that the lock is deactivated.