Hoover HFDN 180XK User Manual
![Hoover HFDN 180XK manual cover](/images/zDhkQeYqSpkHPNmqczvEAeTY/thumbs/thumb175x175.webp)
To change the temperature setting, locate the control panel inside the fridge. Use the temperature adjustment buttons to set the desired level. Refer to the user manual for specific button instructions.
Ensure that the fridge is plugged in and the power is on. Check the thermostat setting and make sure the vents inside the fridge are not blocked. If the issue persists, consider defrosting the appliance or contacting a technician.
To defrost, unplug the refrigerator and remove all food items. Leave the door open to allow ice to melt. Use towels to absorb water as the ice melts. Clean and dry the interior before plugging back in.
Unplug the refrigerator and remove all food items. Use a mixture of mild detergent and warm water to wipe down the interior surfaces. Rinse with clean water and dry with a soft cloth. Avoid using abrasive cleaners.
The water filter should be replaced every six months, or more frequently if you notice a decrease in water flow or a change in water taste. Refer to the user manual for specific replacement instructions.
Inspect the door gasket for dirt or damage. Clean the gasket with warm soapy water and dry it thoroughly. If the gasket is damaged, it may need to be replaced. Ensure that the fridge is level for proper door alignment.
Ensure the fridge is level on the floor. Check for vibrations by adjusting the feet. Make sure that the refrigerator is not touching the wall or other kitchen units. Tighten any loose parts if needed.
Place items evenly on the shelves without overcrowding. Ensure air can circulate freely. Store raw meat on the bottom shelf to avoid contamination. Use the crisper drawers for fruits and vegetables.
The serial number is typically located on a sticker inside the refrigerator compartment, near the top or side wall. Consult your user manual for the exact location.
To reset the alarm, check that the doors are properly closed. Press the alarm reset button on the control panel to turn off the alarm sound. Ensure the fridge temperature is set correctly.