Hoover HF122UDD 001 Instruction Manual
![Hoover HF122UDD 001 manual cover](/images/WMHVaLKHReXBcLlBigdUIpvV/thumbs/thumb175x175.webp)
To clean the filters on your Hoover HF122UDD 001, remove the filter assembly from the vacuum and rinse it under lukewarm water. Allow it to dry completely before reinserting it into the vacuum.
Check for blockages in the hose, brush bar, or filters. Clean or replace the filters if necessary. Ensure that the dust container is not full and is properly attached.
Charge the battery when the power indicator light shows a low battery. It's recommended to fully charge the battery before using it for the first time.
Regularly check the brush bar for hair or debris. Remove any obstructions and use scissors to cut away any tangled strands.
Yes, the Hoover HF122UDD 001 is suitable for use on hardwood floors as well as carpets. Ensure the brush bar is set appropriately to avoid scratching.
Check if the battery is charged and properly inserted. Also, inspect the power switch and connections for any visible damage.
To empty the dust container, detach it from the main body, open the bottom lid over a trash bin, and let the contents fall out. Close the lid securely before reattaching.
The Hoover HF122UDD 001 provides approximately 40 minutes of runtime on a full charge, depending on the power mode used.
To replace the battery, press the release button to remove the old battery, then insert the new battery until it clicks into place securely.
Unusual noises may be due to blockages, debris stuck in the brush bar, or worn-out parts. Inspect and clean the vacuum as needed, and replace any damaged components.