Hoover HDYN 1L390OB-80 User Manual
![Hoover HDYN 1L390OB-80 manual cover](/images/DLiSQYPjBuYwlzTBpvJdoCeQ/thumbs/thumb175x175.webp)
To reset your Hoover HDYN 1L390OB-80, turn off the power to the machine, wait for a few minutes, then turn it back on. This should reset the machine's electronic controls.
Check if the drain hose is kinked or blocked. Ensure the filter is clean and free from debris. If the issue persists, there might be a problem with the pump that requires professional service.
Remove the detergent drawer by pulling it out gently. Wash it under warm water to remove any detergent residue. Use a soft brush to clean hard-to-reach areas, then let it dry before reinserting.
Perform a monthly check of the door seal, clean the detergent drawer, and inspect the filter. Annually, check the hoses for any signs of wear or damage and replace if necessary.
Ensure the load is balanced and not too heavy. Check if the 'Spin' option is selected. If the problem continues, inspect the drive belt and motor for issues, which may require professional assistance.
Use a high-efficiency (HE) detergent to ensure optimal performance and prevent excess suds. Follow the detergent manufacturer's instructions for the correct amount to use.
Regularly clean the drum and door seal with a solution of water and vinegar. Leave the door slightly open between washes to allow air circulation and prevent mold growth.
Select your desired wash cycle, then press the delay start button to set the desired time delay. Confirm by pressing the start button. The machine will begin the wash cycle after the set delay.
Refer to the user manual for specific error code meanings. Most issues can be resolved by resetting the machine or addressing the specific problem indicated by the code.
Yes, use the machine's delicate or gentle cycle. Place delicate items in a mesh laundry bag to provide extra protection during the wash.