Hoover HDPN 4S622PW-AUS User Manual

To start a wash cycle, ensure the dishwasher is loaded correctly, add detergent, select the desired wash program using the control panel, and press the start button.
Check for blockages in the drain hose and filter. Ensure the sink's drain is not clogged. Clean the filter and remove any debris.
To clean the filter, remove the lower basket, twist the filter counterclockwise, and lift it out. Rinse under running water and remove any debris. Reinstall by reversing the process.
Error code E3 indicates a heating issue. Check if the water supply is connected and the inlet valve is functioning. If the problem persists, contact customer support.
It is recommended to clean the spray arms every month to ensure optimal performance. Remove and rinse them under running water to clear any blockages.
Check if the rinse aid dispenser is filled and functioning. Ensure the selected program includes a drying phase. Also, verify that the dishes are not blocking the spray arms.
To reset the dishwasher, turn it off and unplug it from the power source for about 10 minutes. Plug it back in and turn it on. This should reset the control panel.
Use a high-quality, dishwasher-specific powder, gel, or tablet detergent. Avoid using regular dish soap as it may cause excessive suds.
Yes, but use a gentle cycle specifically designed for delicate items and ensure they are securely placed to prevent movement during the wash.
Regular maintenance includes cleaning the filter, checking and cleaning the spray arms, ensuring the rinse aid dispenser is filled, and inspecting the door seal for debris.