Hoover HDPN 2D360PB-80 User Manual
![Hoover HDPN 2D360PB-80 manual cover](/images/IquiqgfBBjIoAIZWfIZLfJug/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes, add detergent, select the desired program using the program button, and press the start button. The machine will indicate that the cycle has begun.
Check if the drain hose is kinked or blocked. Ensure the sink's drain is clear. Clean the filters and ensure they are properly installed. If the problem persists, consult the user manual or contact customer support.
Remove the lower basket and unscrew the cylindrical filter. Rinse it under running water and remove any debris. Clean the flat filter underneath as well and reassemble before placing back in the dishwasher.
Regularly clean the filters, check and clean the spray arms, wipe the door seals with a damp cloth, and occasionally run an empty cycle with a dishwasher cleaner to maintain optimal performance.
Unusual noises could be due to dishes or utensils not properly loaded, causing them to move during the cycle. Check for obstructions in the spray arms and ensure they spin freely.
Consult the user manual to locate the water hardness dial inside the machine. Adjust according to your local water hardness level to ensure optimal cleaning and prevent limescale buildup.
Ensure the door is fully closed and latched. Check that the dishwasher is plugged in and that the circuit breaker is not tripped. If the issue persists, consult the manual or contact customer service.
Ensure the rinse aid compartment is filled as rinse aid helps with drying. Select a program with a drying phase and avoid overcrowding the dishwasher to allow for proper air circulation.
Refer to the user manual for a list of error codes and their meanings. Follow the troubleshooting steps provided for each code. If unresolved, contact Hoover customer support.
Yes, but ensure the plastic items are labeled dishwasher-safe. Place them in the upper rack to prevent warping. Avoid using high-temperature settings for delicate plastics.