Hoover HDPN 1L360OW-80 User Manual
![Hoover HDPN 1L360OW-80 manual cover](/images/FTgHRfHdlzEAKAHAWdZhcgot/thumbs/thumb175x175.webp)
To reset the dishwasher, press and hold the start button for about 3 seconds until the control panel lights turn off, then release the button.
Check for blockages in the drain hose or filter. Ensure the drain hose is not kinked and clean the filter located at the bottom of the dishwasher.
Remove the lower rack to access the filter. Twist the filter counterclockwise to unlock it, then lift it out and rinse under running water. Reinstall by aligning and twisting clockwise to lock.
Ensure the door is fully closed and latched. Check if the child lock is activated and confirm that the power supply is connected.
Select the intensive cycle, which uses higher water temperatures and increased spray pressure to clean heavily soiled cookware effectively.
Open the rinse aid dispenser cap and turn the arrow to adjust the amount dispensed, with higher numbers providing more rinse aid per cycle.
Check and refill the rinse aid dispenser and ensure you are using the appropriate detergent. Consider using a water softener if you have hard water.
Clean the spray arms every few months or if you notice a decrease in cleaning performance. Remove them and rinse under warm water to clear any blockages.
Regularly clean the filter and door seals. Run an empty cycle with a dishwasher cleaner or a cup of vinegar to remove lingering odors.
Yes, but place them on the top rack to avoid exposure to the heating element, which could cause warping or melting.