Hoover HDPH 2D945W-86 User Manual
![Hoover HDPH 2D945W-86 manual cover](/images/BPxiDORzcyyBLfEiixHhPjUu/thumbs/thumb175x175.webp)
To start a wash cycle, first load your dishes into the dishwasher, add detergent, and select the desired wash program using the control panel. Press the start button to begin the cycle.
Ensure the dishwasher is properly plugged in and the door is fully closed. Check if the circuit breaker has tripped. If the problem persists, refer to the user manual or contact customer support.
To clean the filter, open the dishwasher and remove the bottom rack. Twist the filter counterclockwise and lift it out. Rinse it under running water to remove debris, then reinstall it by twisting it clockwise.
Regular maintenance includes cleaning the filter, wiping down the door seals, checking spray arms for blockages, and running an empty cycle with a dishwasher cleaner once a month.
Consult the user manual for a list of error codes and their meanings. Follow the recommended troubleshooting steps for each specific error code. If unresolved, contact Hoover customer service.
Yes, gel detergents can be used. However, ensure that you follow the manufacturer's guidelines for the amount and type of detergent suitable for your dishwasher model.
Refer to your user manual to locate the water hardness settings on the control panel. Adjust the settings according to your local water hardness level for optimal cleaning results.
Ensure that you are using a rinse aid and that the rinse aid compartment is filled. Also, check that the selected wash program includes a drying phase.
To reset the dishwasher, press and hold the start/reset button for a few seconds until the display clears. Refer to the manual for further instructions if needed.
Noises can be caused by items in the dishwasher hitting each other. Ensure dishes are properly loaded. If noise persists, check for obstructions in the spray arms or contact support.