Hoover HDPH 2D1145X User Manual
![Hoover HDPH 2D1145X manual cover](/images/YhtVwEosbFhfEQnvfmEdkQnO/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes, add detergent, close the door, and select the desired program on the control panel. Press the start button to begin the cycle.
First, check if the drain hose is kinked or clogged. Ensure the filter is clean and free from debris. If issues persist, inspect the garbage disposal connection for blockages.
Remove the lower rack to access the filter at the bottom of the dishwasher. Twist the filter counterclockwise to remove it, then rinse under running water to clean debris. Reinstall by twisting clockwise.
To reset the dishwasher, turn it off and unplug it from the power source. Wait for about 5 minutes, plug it back in, and turn it on. This should reset the electronic controls.
Place larger items like pots and pans on the lower rack, and smaller items such as cups and glasses on the upper rack. Ensure that nothing blocks the spray arms from rotating freely.
Ensure that the rinse aid dispenser is filled, as this aids the drying process. Also, check if you have selected a drying cycle, such as the heated dry option.
Refer to the user manual for a list of error codes and their meanings. Common solutions include checking water supply, ensuring door closure, and inspecting the filters and hoses for blockages.
Yes, but it is recommended to use a dishwasher salt and rinse aid to improve wash performance and reduce limescale buildup. Consider installing a water softener for optimal results.
Regularly clean the filter, check and clean the spray arms, wipe down the door seals, and run an empty cycle with dishwasher cleaner to maintain optimal performance.
Use the eco or energy-saving wash programs, ensure full loads before running, and avoid using heated drying by allowing dishes to air dry when possible.