Hoover HDPH 2D1049B-80 User Manual
![Hoover HDPH 2D1049B-80 manual cover](/images/snvNGDrZKOZepxpDIKQxMaIE/thumbs/thumb175x175.webp)
To ensure optimal cleaning, load larger and more heavily soiled items such as pots and pans in the bottom rack. Place more delicate items and glasses on the top rack. Ensure that all items are tilted so water can run off freely. Do not block the spray arms.
First, check that the drain hose is not kinked or blocked. Make sure that the sink drain is not clogged. Additionally, clean the dishwasher filter and check for any debris that may be blocking the pump.
To clean the filter, remove the bottom rack to access the filter. Twist and lift out the filter, then rinse it under running water to remove debris. Use a soft brush if necessary. Reinstall the filter securely before using the dishwasher again.
Use a high-quality dishwasher detergent suitable for your water hardness level. Powder, gel, or tablet detergents can be used. Avoid using dish soap or handwashing detergent as they can cause excessive suds.
Refer to the user manual for a list of error codes and their meanings. Common solutions include checking water supply, ensuring proper drainage, and resetting the dishwasher by turning it off and back on.
Regular maintenance includes cleaning the filter, inspecting and cleaning the spray arms, wiping down the door seals, and checking the detergent dispenser for buildup. Perform these tasks monthly for optimal performance.
Ensure that the rinse aid dispenser is filled, as this helps with drying. Select a higher drying setting if available, and open the door slightly after the cycle ends to allow moisture to escape.
Yes, you can wash plastic items, but they should be placed on the top rack to avoid direct contact with the heating element. Ensure that plastic items are labeled as dishwasher-safe.
Inspect the door seal for damage or debris, and ensure it is clean. Check for overloading or improper loading of dishes. Verify that the detergent is not causing excessive suds. If the issue persists, contact a service technician.
To reset the dishwasher, turn off the power at the main switch or unplug it for a few minutes. After restoring power, try starting the dishwasher again. If it still does not respond, consult the user manual or contact customer support.