Hoover HDP 2LO36X User Manual

To start a wash cycle, load your dishes, add detergent, select the desired program using the program selector, and press the start button. Make sure the water supply is turned on.
Check if the drain hose is kinked or clogged. Ensure the filter and drain pump are clean. Refer to the user manual for detailed cleaning instructions.
Remove the lower basket and unscrew the cylindrical filter. Wash it under running water to remove debris. Reassemble the filter before using the dishwasher.
E3 indicates a heating issue. Ensure the water supply temperature is adequate and check the heating element for faults. If the problem persists, contact a service technician.
Yes, select a program suitable for heavy-duty cleaning, such as the Intensive or Pots & Pans cycle, to effectively clean cookware.
Ensure you are using a rinse aid and that it is filled to the appropriate level. Adjust the rinse aid setting if necessary.
Regularly clean the filter, spray arms, and door seals. Check for any leaks or unusual noises and ensure the drain hose is clear.
Place larger items like pots on the bottom rack and smaller, more delicate items on the top rack. Ensure nothing blocks the spray arms.
Check that the spray arms are not obstructed and that the filter is clean. Use the correct amount of detergent and ensure the water temperature is optimal.
To reset the dishwasher, turn it off by pressing the power button, wait a few seconds, and then turn it back on. This can help resolve minor issues.