Hoover HDIN 4D620PB E User Manual

To start a wash cycle, load the dishwasher, add detergent, select the desired program on the control panel, and press the start button. Ensure the door is closed properly to initiate the cycle.
Check for blockages in the drain hose and filter. Make sure the sink drain is not clogged. If the problem persists, inspect the pump for obstructions or damage.
It is recommended to clean the filter once a month to maintain efficient performance and prevent odors. Remove the filter and rinse it under running water.
Error code E3 indicates a heating issue. Check if the water supply is sufficient and the heating element is functioning properly. If the issue persists, contact customer service for further assistance.
It is recommended to use high-quality dishwasher detergent specifically designed for automatic dishwashers. Avoid using hand-dishwashing liquid as it may cause excessive foam.
To enhance drying, use a rinse aid, ensure the "Extra Dry" option is selected (if available), and unload the bottom rack first to prevent water drips from the upper rack.
Ensure that dishes are loaded properly without touching each other, check for loose items in the tub, and inspect the spray arms for obstructions or damage.
To reset the dishwasher, turn it off and unplug it from the power source for about 10 minutes. Plug it back in and turn it on to reset the system.
Ensure you are using a suitable detergent and rinse aid. Also, check the water hardness level and adjust the water softener setting if necessary.
Regular maintenance includes cleaning the filter, checking and cleaning the spray arms, inspecting the door gasket for debris, and ensuring the water inlet valve is free from blockages.