Hoover HDIN 2L360PB-80 User Manual

To start a wash cycle, load your dishes, add detergent, select your desired program using the control panel, and press the start button. Ensure the door is properly closed.
Check if the drain hose is kinked or clogged. Clean the filter and ensure the pump is not obstructed. If the problem persists, consult the manual or contact customer service.
It is recommended to clean the filter every month to ensure optimal performance and to prevent blockages.
Load larger items like pots and pans on the bottom rack and smaller items like cups and glasses on the top rack. Ensure items do not block the spray arms.
Ensure the spray arms are not blocked, use the correct amount of detergent, and verify that the water temperature is hot enough. Check for any blocked filters.
Regularly clean the filter, check and clean spray arms, inspect the door seals for damage, and run a cleaning cycle with dishwasher cleaner once a month.
Noises may be due to items touching the spray arms, a clogged filter, or an issue with the pump. Check these components and adjust as necessary.
Use dishwasher-specific detergents only. Avoid using regular dish soap as it can cause excessive suds.
To reset the dishwasher, turn it off, wait a few minutes, and then turn it back on. Refer to the user manual for specific reset instructions if needed.
Inspect the door seals for damage, ensure the dishwasher is level, and check the water inlet and drain hoses for leaks. Consider contacting a technician if the issue persists.