Hoover HDIN 2L360PB User Manual
![Hoover HDIN 2L360PB manual cover](/images/BLvbnGIjIhlpejPxIiHRxzVi/thumbs/thumb175x175.webp)
To reset your Hoover HDIN 2L360PB dishwasher, press and hold the start button for approximately 3 seconds until the display clears or resets.
Check the filter and drain hose for any blockages, ensure the sink drain is clear, and inspect the dishwasher's pump for any obstructions.
Ensure that the Rinse Aid dispenser is filled, use a higher temperature setting, and select the Extra Dry option if available.
Remove the filter assembly by twisting it counterclockwise and rinse it under running water to remove debris. Use a soft brush if necessary.
Clean the spray arms every 3 to 6 months or if you notice a decrease in cleaning performance. Remove and rinse them under water, and use a toothpick to clear any blocked holes.
White residue is often due to hard water. Ensure the salt reservoir is filled if your model includes it, and adjust the rinse aid setting as needed.
Error code E3 typically indicates a heating issue. Check the heating element and thermostat, or consult a technician for further diagnosis.
Ensure the dishwasher is level, check for loose items or utensils inside, and inspect the spray arms and motor for obstructions or damage.
Regularly clean the filter, spray arms, and door seals, check for leaks, and run a cleaning cycle with a dishwasher cleaner every 1-2 months.
Load larger items like pots and pans on the bottom rack, place cups and glasses on the top rack, and avoid overcrowding to ensure water can circulate freely.