Hoover HDI 90 X Instruction Manual
![Hoover HDI 90 X manual cover](/images/SlXXqGaovnaEpLLQnsAkWOGd/thumbs/thumb175x175.webp)
To properly load dishes, place larger items like pots and pans on the bottom rack, ensuring they do not block the spray arms. Smaller items and more delicate dishes should be placed on the top rack. Ensure all items are secure and that the spray arms can move freely.
First, check if the dishwasher is properly plugged in and that the circuit breaker has not tripped. Ensure the door is fully closed and latched. If the issue persists, consult the user manual for the specific error code displayed or contact Hoover customer service.
To clean the filter, remove the lower dish rack and twist the filter assembly counterclockwise to unlock it. Rinse the filter under running water to remove debris. Reassemble the filter and secure it by turning it clockwise. Regular cleaning will help maintain optimal performance.
Ensure the rinse aid dispenser is filled, as rinse aid helps with drying. Check if the selected wash cycle includes a drying phase, and consider using a higher temperature setting for better drying results.
To reset the dishwasher, press the Start/Reset button and hold it for about 3-5 seconds. This should clear any current cycle and reset the appliance. If issues persist, refer to the troubleshooting guide in the user manual.
Ensure the dishwasher is level and properly installed. Check for any loose items inside the dishwasher that might be vibrating. Ensure that the spray arms are not hitting dishes. If noise persists, it may indicate a mechanical issue that needs professional attention.
Regularly clean the filter and check for food debris inside the dishwasher. Run a cleaning cycle with a dishwasher cleaner or a cup of vinegar on the top rack. Leave the door slightly ajar when not in use to allow air circulation.
It is recommended to use high-quality dishwasher detergents, either in powder, gel, or tablet form. Avoid using regular dish soap as it can cause excessive suds and damage the dishwasher.
Ensure the dishwasher is not overloaded and that items are not blocking the spray arms. Regularly check and clean the spray arms and filter. Use the appropriate wash cycle for the load and ensure that the water temperature is set to the recommended level.
Check the door seal for any damage or debris and clean it if necessary. Ensure the dishwasher is level and not overfilled. Inspect the hose connections for any leaks. If the problem continues, contact a qualified technician for further inspection.