Hoover HBFUP 130 K User Manual
![Hoover HBFUP 130 K manual cover](/images/d1339f462bdfe12e230026e5/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the fridge compartment. Turn the temperature dial to your desired setting. For optimal cooling, it's recommended to set it between 3-5 degrees Celsius.
First, check if the appliance is plugged in and the power is on. Ensure the temperature setting is correct. Clean the condenser coils at the back of the fridge and ensure there's adequate ventilation around the appliance. If the problem persists, consider contacting customer support.
The Hoover HBFUP 130 K is equipped with an auto-defrost function. However, if you notice significant frost buildup, it's advisable to manually defrost the fridge every 6 months by unplugging it and allowing the ice to melt.
Keep the fridge door closed as much as possible to maintain a consistent temperature. Make sure the door seals are intact and clean. Avoid overloading the fridge to allow air to circulate efficiently. Position the fridge away from direct sunlight and heat sources.
Unplug the fridge before cleaning. Use a solution of warm water and mild detergent to wipe down the interior surfaces. Avoid using abrasive cleaners or sharp objects that might damage the surfaces. Rinse with clean water and dry thoroughly before plugging it back in.
Unusual noises can be caused by the fridge being unlevel, items touching the back wall, or the condenser fan being obstructed. Ensure the fridge is on a level surface, rearrange items, and check for any obstructions. If the noise persists, consult the manual or contact support.
First, unplug the fridge. Locate the light cover inside the fridge and remove it. Unscrew the old bulb and replace it with a new one of the same specifications. Reattach the light cover and plug the fridge back in.
Water pooling can result from a blocked defrost drain. Clear any food particles or ice blocking the drain with a pipe cleaner or warm water. Ensure the fridge is level to allow proper drainage.
Yes, the door swing direction can be changed. Refer to the user manual for detailed instructions, which typically involve removing the door and hinges, then reinstalling them on the opposite side. Ensure all screws are tightly secured.
Regularly clean the condenser coils, ensure door seals are intact, and defrost when necessary. Avoid placing hot items inside the fridge and ensure there's adequate ventilation around the appliance. Regular maintenance checks can help prolong its efficiency.