Hoover FRHNL3505A User Manual
![Hoover FRHNL3505A manual cover](/images/ec93b005efe7b45de9907b06/thumbs/thumb175x175.webp)
To set up your Hoover FRHNL3505A for the first time, plug the appliance into a power outlet, set the desired temperature using the control panel, and allow it to cool for a few hours before placing any food inside.
Check the thermostat setting to ensure it's set to the correct temperature. Ensure the door is closing properly and not obstructed. Clean the condenser coils to improve cooling efficiency.
You should defrost the freezer when the frost buildup reaches about 1/4 inch thick. Generally, this should be done every 6 months or as needed.
Remove all food and shelves. Use a solution of mild soap and warm water to clean the interior surfaces. Rinse with clean water and dry with a soft cloth before replacing shelves and food.
Ensure the refrigerator is level on the floor. Check for any loose components or items inside that might be vibrating. If the noise persists, contact customer service for further assistance.
First, check the bulb to see if it needs replacement. If the bulb is fine, inspect the light switch for any damage. If neither is the issue, consult a professional technician.
Use the control panel located inside the refrigerator to adjust the temperature settings. Press the temperature buttons to increase or decrease the temperature as needed.
Check if the defrost drain is clogged. Clear any blockages to ensure proper drainage. Also, ensure the doors seal properly to prevent condensation build-up.
Ensure the refrigerator is positioned away from heat sources and direct sunlight. Keep the condenser coils clean and ensure the door seals are intact and functioning efficiently.
Do not overload the refrigerator; ensure air circulation is not obstructed. Place perishable items in the main compartment and adjust shelves to accommodate different sizes of items.