Hoover FM18LB2 001 User Manual
![Hoover FM18LB2 001 manual cover](/images/a109c719a4320abee93b220d/thumbs/thumb175x175.webp)
To clean the filter, first ensure the vacuum is unplugged. Remove the dust container, then take out the filter. Rinse the filter under warm water until the water runs clear. Allow it to dry completely before reinserting it into the vacuum.
Check if the dust container is full and empty it if necessary. Inspect and clean the filter, as a clogged filter can reduce suction. Also, check for any blockages in the hose or brush roll.
The filter should be replaced every 6 to 12 months, depending on usage frequency. If you notice a decrease in performance or visible wear and tear, consider replacing it sooner.
A loud noise could be due to a blockage in the hose or brush roll. Check for any debris and clear it. Additionally, inspect the brush roll for tangled hair or fibers.
Yes, the Hoover FM18LB2 001 is suitable for hardwood floors. Ensure the brush roll is set to the appropriate setting to avoid scratching the floor surface.
To maintain battery life, fully charge the battery before using the vacuum for the first time. Avoid letting the battery completely drain regularly and charge it after each use. Store the vacuum in a cool, dry place.
First, ensure the vacuum is fully charged. Check the power connections and make sure the battery is properly seated. If it still doesn't turn on, inspect for any visible damage and consult the user manual for further instructions.
To change the brush roll, turn off and unplug the vacuum. Locate the brush roll cover on the underside and remove the screws or clips holding it in place. Slide out the old brush roll and insert the new one, then secure the cover.
The Hoover FM18LB2 001 typically comes with a crevice tool, dusting brush, and upholstery tool. Attach them to the nozzle or wand for specific cleaning needs like corners, delicate surfaces, and furniture.
Store the vacuum in a cool, dry place, ideally standing upright or using a wall mount if provided. Ensure the dust container is empty and the filter is clean before storage to maintain performance.