Hoover DYC 710AVBX-80N User Manual
![Hoover DYC 710AVBX-80N manual cover](/images/5b5d8d58a6c2c921b36c6eca/thumbs/thumb175x175.webp)
To start a drying cycle, load your laundry into the dryer, close the door, select the desired drying program using the program dial, and press the start button to initiate the cycle.
If the dryer is not heating, check if the lint filter is clean, ensure the door is properly closed, and verify that the power supply is stable. If the issue persists, contact a professional technician to inspect the heating elements.
To clean the lint filter, open the dryer door, locate the filter at the bottom of the door opening, and pull it out. Remove the lint by hand or with a soft brush, and then reinsert the filter securely before starting the next cycle.
Regular maintenance includes cleaning the lint filter after every use, checking the condenser unit monthly, and wiping the drum with a damp cloth to remove any residue.
To reset the dryer, turn off the appliance, unplug it from the power source, wait for about 5 minutes, then plug it back in and turn it on. This can help resolve minor electronic issues.
Unusual noises could be due to items caught in the drum or filters. Check for foreign objects, ensure the dryer is level, and inspect the drum and filter for obstructions. If the noise continues, consult a service technician.
To access the condenser unit, open the lower panel at the front of the dryer, release the condenser cover, and slide the unit out. Rinse it under running water to remove lint and debris, then let it dry completely before reinserting.
For optimal performance, avoid overloading the dryer and adhere to the recommended load size of 7kg. Overloading can lead to inefficient drying and increased wear on the appliance.
Mid-cycle stops can be caused by power interruptions, overheating, or door latch issues. Check the power supply, allow the dryer to cool down, and ensure the door is securely closed before restarting the cycle.
To adjust the drying time, select a manual drying program and use the time selector buttons to increase or decrease the drying duration according to your preference.