Hoover DXO H10A2TKES-80 User Manual
![Hoover DXO H10A2TKES-80 manual cover](/images/d417a629d8b4d1615de0bad8/thumbs/thumb175x175.webp)
To clean the filter, first turn off and unplug the machine. Locate the filter at the bottom front of the dryer, remove it, and clean it under running water. Ensure it is completely dry before reinserting.
Check if the dryer is properly plugged in and the circuit breaker is not tripped. Ensure the door is fully closed, and the selected cycle requires heat. If the issue persists, contact a technician for further assistance.
Ensure that the load is not too large, and the items are evenly distributed. Clean the lint filter regularly and use the appropriate drying setting for the fabric type.
Unusual noises can be due to loose objects in the drum or the machine being unlevel. Check for any foreign objects and ensure the dryer is on a stable surface. If the noise continues, consult a technician.
Regularly clean the lint filter and check for blockages in the vent. Inspect the drum for any signs of wear and ensure the door seal is intact.
To reset the dryer, unplug it from the wall outlet, wait for about a minute, and then plug it back in. This can help resolve minor electronic glitches.
Yes, but it is recommended to use a drying rack or a special shoe drying accessory to prevent them from tumbling freely, which can cause damage or noise.
Use the "Delicates" cycle, which uses lower heat settings to prevent damage to delicate fabrics. Always check garment care labels before selecting a cycle.
Ensure the door is fully closed and latched. Check that the power cord is plugged in and the circuit breaker is not tripped. If the problem persists, there may be an issue with the start button or control panel.
Remove clothes promptly after the cycle ends. Use the "Anti-Crease" feature if available, which periodically tumbles clothes to reduce wrinkles.