Hoover DX C9DE-80 User Manual
![Hoover DX C9DE-80 manual cover](/images/ea9e0a3f8e68a89c2198f3b7/thumbs/thumb175x175.webp)
To start a drying cycle, turn on the dryer, select the desired program using the program selector dial, adjust settings if necessary, and press the start button.
Check if the dryer is properly connected to the power supply, ensure that the selected program requires heat, and inspect the thermal fuse. If the issue persists, consult a professional technician.
Open the door, locate the lint filter at the bottom of the door opening, pull it out, and remove any lint. Wash the filter under running water if necessary, dry it, and place it back securely.
Unusual noises can be caused by foreign objects in the drum, uneven loads, or worn drum bearings. Check the drum for objects and redistribute the load. If noise persists, contact a professional.
To reset the dryer, turn it off, unplug it from the power outlet, wait for a few minutes, then plug it back in and turn it on. This can help resolve minor electronic glitches.
Regularly clean the lint filter, check and clean the condenser unit if applicable, ensure the drum is free of foreign objects, and inspect the vent system for blockages.
To prevent wrinkling, remove clothes promptly after the cycle ends, use the appropriate drying cycle for different fabrics, and avoid overloading the dryer.
Error code E21 typically indicates a problem with the water pump or drainage system. Check for blockages or issues with the pump, and consult the user manual or a technician if needed.
To adjust the drying time, select a manual drying program and use the time selector buttons to increase or decrease the drying duration as needed.
It is not recommended to dry shoes in the dryer as it may damage both the shoes and the dryer. Consider air drying or using a shoe-specific drying rack accessory if available.