Hoover BHBF 192 FK User Manual
![Hoover BHBF 192 FK manual cover](/images/cac573119aa6bb51d8fe9492/thumbs/thumb175x175.webp)
To reset the filter indicator light, press and hold the reset button located near the indicator light for approximately 5 seconds until the light turns off.
Check if the ventilation openings are blocked, ensure the door is closing properly, and verify that the temperature settings are correct. If the problem persists, consider consulting a technician.
It is recommended to clean the condenser coils every 6 months to maintain optimal performance and energy efficiency.
To defrost the freezer, remove all contents, unplug the refrigerator, and leave the freezer door open. Use towels to absorb water as the ice melts. Once defrosted, clean and dry the interior before plugging it back in.
To adjust the door alignment, loosen the hinge bolts slightly, adjust the door to the desired position, and then tighten the bolts securely. Ensure the door seals properly after adjustment.
The noise could be due to the compressor or the fan. Ensure the appliance is level, and check for any loose components. If the noise persists, contact a service technician for further diagnosis.
To change the light bulb, turn off the power to the refrigerator, remove the cover of the light bulb compartment, unscrew the old bulb, and replace it with a new one of the same type and wattage.
Clean the door seals with warm soapy water and ensure they are free from debris. If the seals are damaged, they may need to be replaced.
To maximize energy efficiency, keep the refrigerator away from heat sources, ensure the door seals are tight, avoid overloading, and maintain an appropriate temperature setting.
Check if the drain hole is blocked and clean it if necessary. Ensure the appliance is level and that the door seals are intact. If the problem persists, seek professional repair assistance.