Hoover ATD C9TKEXS-80 User Manual

To start a wash cycle, load your laundry, add detergent to the dispenser, select the desired program using the control dial, and press the start button. Ensure the door is closed properly.
Check if the drain hose is kinked or clogged. Also, inspect the pump filter for blockages and clean it if necessary. Ensure the drain hose height is within the recommended range.
Remove the detergent drawer by pulling it out completely. Clean it with warm water and a soft brush to remove any detergent residue. Dry it thoroughly before reinserting.
Ensure the machine is level on the floor. Adjust the feet if necessary. Also, make sure the laundry load is balanced inside the drum to prevent excessive vibration.
Run an empty wash cycle at the highest temperature using a descaling agent or a cup of white vinegar to clean the drum and eliminate any residue or odors.
Error code E03 indicates a drainage issue. Check the drain pump filter and hose for blockages, and ensure the pump is operational.
You can pause a wash cycle by pressing the start/pause button. The door will unlock after a short delay, allowing you to add or remove items if necessary.
Locate the filter access door at the bottom of the machine. Open it, unscrew the filter cap, and remove any debris. Clean the filter under running water and reattach it securely.
Check if the machine is plugged in and the power outlet is functional. Also, ensure the door is properly closed and the water supply is turned on.
Use lower temperature settings and full loads whenever possible. Regularly clean the machine, including the filter and detergent drawer, to maintain efficiency.