Hoover ATC18LI 001 User Manual
![Hoover ATC18LI 001 manual cover](/images/2752aef47f05223a51622e97/thumbs/thumb175x175.webp)
To charge the Hoover ATC18LI 001 battery, connect the charger to the vacuum cleaner and plug it into a power outlet. The charging indicator will light up, showing that the battery is charging. It typically takes around 5 hours to fully charge.
If the Hoover ATC18LI 001 does not start, ensure that the battery is charged. Check for any blockages in the nozzle or filters, and clean them if necessary. Also, ensure that the dust container is properly installed.
It is recommended to clean the filters of your Hoover ATC18LI 001 after every 5 uses to ensure optimal performance. Rinse the filters with water and let them dry completely before reinstalling.
Yes, the dust container of the Hoover ATC18LI 001 can be washed. Make sure to empty it first, then rinse it with water and let it dry completely before reattaching it to the vacuum cleaner.
If the suction power is weak, check for blockages in the nozzle, hose, or filters. Clean or replace the filters if necessary, and ensure that the dust container is not full.
To extend the battery life of your Hoover ATC18LI 001, avoid letting the battery completely drain before recharging. Store the vacuum in a cool, dry place, and use the Eco mode for less intensive cleaning tasks.
Regular maintenance includes emptying the dust container after each use, cleaning the filters every 5 uses, and checking the brush roll for hair or debris build-up. Keeping these parts clean will ensure efficient operation.
The Hoover ATC18LI 001 typically comes with a crevice tool, a dusting brush, and an upholstery tool for versatile cleaning. Refer to the user manual for a complete list of included attachments.
Store the Hoover ATC18LI 001 in a dry place away from direct sunlight. Ensure it is turned off and the battery is charged. Keep it in an upright position to prevent any accidental damage.
If the Hoover ATC18LI 001 overheats, turn it off and unplug it immediately. Check for blockages and clean the filters. Allow it to cool down for at least 30 minutes before attempting to use it again.