Hisense WMS017M6XBE Use & Care Guide

To perform a factory reset on your Hisense WMS017M6XBE, press and hold the 'Power' and 'Start/Pause' buttons simultaneously for 5 seconds until the machine beeps. This will reset all settings to their defaults.
First, check if the drain hose is kinked or clogged. Ensure that the drain filter is clean and free of debris. If the problem persists, it could be a pump issue, and you may need to contact customer support.
Run an empty wash cycle with hot water and add a cup of white vinegar or a washing machine cleaner to the drum. This helps remove any build-up or odors.
Excessive vibration can be caused by an unbalanced load. Ensure that clothes are evenly distributed in the drum. Also, check that the washing machine is level on the floor. Adjust the feet if necessary.
Keep the door and detergent dispenser slightly open when not in use to allow air circulation. Regularly clean the door seal and run a monthly maintenance wash with a washing machine cleaner.
Use a high-efficiency (HE) detergent to ensure optimal washing performance and to prevent excessive suds. Follow the detergent manufacturer's instructions for the correct dosage.
Check the door seal for any damage or debris that might prevent a proper seal. Inspect the hoses and connections for any leaks or loose fittings. Tighten or replace as necessary.
Ensure that the machine is plugged in and the door is securely closed. Check that the water supply is turned on and the control panel is not locked. If the problem persists, unplug the machine for a few minutes and try again.
Clean the lint filter after every wash cycle to ensure optimal performance and to prevent lint build-up, which can cause drainage issues.
Yes, you can wash delicate fabrics using the 'Delicate' cycle. Use a mild detergent and place delicate items in a mesh laundry bag for added protection.