Hisense HQD20058SV Use & Care Guide
![Hisense HQD20058SV manual cover](/images/b61ea1e0c32355b044011ec1/thumbs/thumb175x175.webp)
To reset your Hisense HQD20058SV to factory settings, press the 'Settings' button on the remote, navigate to 'System', select 'Reset', and confirm the reset process.
Check if the vents are blocked, ensure the thermostat is set correctly, and verify that the door seals are intact. If the issue persists, contact Hisense support.
Locate the water filter inside the refrigerator, turn it counterclockwise to remove, insert the new filter, and turn clockwise until it clicks into place.
Clean the condenser coils every 6 months, replace the water filter every 6 months, and check the door seals regularly for wear and tear.
Ensure the refrigerator is level, check for loose items inside, and inspect the condenser fan and evaporator fan for any obstructions or damage.
Yes, you can adjust the shelf height by lifting the shelf slightly and pulling it out, then reposition it at the desired height by aligning it with the shelf slots.
Ensure the ice maker is turned on, check the water supply line for blockages, and verify that the freezer temperature is set to the correct level.
Use a soft cloth and a solution of mild soap and water. Wipe in the direction of the grain, and dry with a clean cloth to prevent water spots.
The Hisense HQD20058SV has an estimated energy consumption of approximately 450 kWh/year, depending on usage and environmental conditions.
Press and hold the 'Lock' button on the control panel for 3 seconds until the lock icon appears, indicating that the controls are locked.