Hisense HRB171N6BSE Use & Care Guide
![Hisense HRB171N6BSE manual cover](/images/22cda35806f99dc77641682e/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the thermostat control inside the refrigerator compartment. Turn the dial to a higher number for a colder setting or a lower number for a warmer setting.
First, ensure the power cord is plugged in and the unit is switched on. Check the thermostat setting and adjust as needed. Ensure the door seals are clean and sealing properly. If the problem persists, consult the user manual or contact customer support.
The Hisense HRB171N6BSE is a frost-free refrigerator, so it does not require manual defrosting. If frost builds up, ensure the door is closing properly and check the gasket for any damage.
Clean the interior with a mixture of mild detergent and warm water. Use a soft cloth or sponge to wipe surfaces, and dry thoroughly. Avoid using harsh chemicals or abrasive materials that can damage surfaces.
Unplug the refrigerator from the power outlet. Locate the light cover inside the refrigerator, remove it, and unscrew the old bulb. Replace it with a new bulb of the same type and wattage, then replace the cover.
Some noises are normal, such as those from the compressor or fans. However, if you hear loud or unusual sounds, check for items vibrating on top or inside the refrigerator. Ensure it is level and stable. If the noise persists, consult a technician.
Keep the refrigerator away from heat sources like ovens or direct sunlight. Ensure the door seals are clean and intact. Avoid opening the door frequently, and set the temperature to the recommended levels.
Check for obstructions in the door path and ensure the refrigerator is level. Inspect the door gasket for dirt or damage and clean or replace if necessary. Adjust the door hinges if the alignment is off.
Place the refrigerator in a well-ventilated area, away from heat sources. Allow it to stand upright for at least 4 hours before plugging in to allow the refrigerant to settle. Adjust the leveling feet to ensure stability.
It is recommended to let the refrigerator run empty for a few hours after turning it on to reach the desired temperature before storing food. This ensures optimal cooling performance.