Hisense DH50K1W Use & Care Guide
![Hisense DH50K1W manual cover](/images/d133be92cd30a4227fe52cba/thumbs/thumb175x175.webp)
To clean the filter, turn off and unplug the dehumidifier. Remove the filter from the back of the unit. Rinse the filter with warm water and let it dry completely before reinserting it. Regular cleaning helps maintain optimal performance.
Ensure the humidity setting is lower than the current room humidity. Check if the filter is clean and verify that the bucket is properly seated. If the problem persists, inspect for any blockages in the air intake or exhaust.
The Hisense DH50K1W is designed to operate in temperatures as low as 38°F. However, performance may decrease in temperatures below this range. Ensure the area is above the unit's minimum temperature for optimal operation.
Press the "Humidity" button on the control panel to adjust the desired humidity level. You can set it between 30% and 80% in increments of 5%. The dehumidifier will maintain the set humidity level by cycling on and off as needed.
The filter indicator light alerts you when it's time to clean the filter. After cleaning the filter, reset the indicator by pressing and holding the "Filter" button for 3 seconds.
Some noise is normal, such as the sound of the compressor and fan. However, if you notice unusual noises like rattling or grinding, check for loose parts or debris inside the unit.
To enable continuous drainage, connect a standard garden hose to the drain outlet on the back of the unit. Ensure the hose is directed to a suitable drainage location and that gravity allows for proper water flow.
The unit may shut off if the humidity level is reached, the bucket is full or not properly seated, or there is a power supply issue. Verify each of these conditions and reset the unit if necessary.
It is not recommended to use an extension cord with the dehumidifier. Plug the unit directly into a properly grounded outlet to prevent overheating and potential electrical issues.
Regular maintenance includes cleaning the filter every two weeks, checking for obstructions in air vents, and inspecting the power cord for damage. Ensure the unit is unplugged before performing any maintenance tasks.