Grundig SuperDry GNFP4630DW User Manual
![Grundig SuperDry GNFP4630DW Dishwasher manual cover](/images/RTMEIGPgGfyjSeRJyZsTHpgf/thumbs/thumb175x175.webp)
To clean the filter, remove the lower rack and twist the cylindrical filter counterclockwise to remove it. Rinse it under running water and use a soft brush if necessary. Reinsert the filter by twisting it back into place clockwise.
First, ensure the door is properly closed and latched. Check that the dishwasher is plugged in and that the circuit breaker hasn't tripped. Also, verify that the water supply is turned on.
Ensure that the rinse aid dispenser is filled, as rinse aid improves drying performance. Additionally, use the SuperDry function for enhanced drying results.
To reset the dishwasher, press and hold the Start/Pause button for about 3 seconds. The dishwasher will beep and the current cycle will be canceled. You can then select a new cycle.
Check that the spray arms are not obstructed and can spin freely. Make sure that dishes are not blocking the detergent dispenser, and verify that you are using the correct amount of detergent.
Clean the filter and spray arms, and wipe down the door seals. Run an empty cycle with a dishwasher cleaner or a cup of white vinegar placed in a dishwasher-safe bowl on the top rack.
Regularly clean the filter and check for any blockages in the spray arms. Keep the door seals clean and ensure the rinse aid dispenser is filled. Run a cleaning cycle with a dishwasher cleaner monthly.
Place larger items on the sides and back, allowing the spray arms to reach the center. Avoid overloading and ensure that items are not nesting. Load cutlery with handles down for better water reach.
Error code “E4” indicates a drainage issue. Check that the drain hose is not kinked or blocked, and ensure the sink drain is clear. Clean the filter to remove any debris.
No, regular dish soap can cause excessive suds and potentially damage the dishwasher. Always use detergent specifically designed for automatic dishwashers.