Grundig InnerClean GNFP3450W User Manual
![Grundig InnerClean GNFP3450W Dishwasher manual cover](/images/sgjXwnxsefLuXhoobmGDlFvQ/thumbs/thumb175x175.webp)
To start a wash cycle, first load the dishes and add detergent. Close the door securely, select the desired program using the program selector button, and press the start button. The dishwasher will begin the cycle automatically.
Check if the drain hose is kinked or blocked. Ensure that the sink's drain is not clogged. Clean the dishwasher's filter and drain pump. If the problem persists, consult the user manual or contact customer service.
To clean the filter, remove the lower rack and twist the filter assembly counterclockwise to unlock it. Rinse the filter under running water and use a soft brush to remove debris. Reinstall the filter by twisting it clockwise until it locks securely.
The InnerClean function is a self-cleaning program designed to maintain the hygiene of the dishwasher. To use it, ensure the dishwasher is empty, select the InnerClean program, and start the cycle. It is recommended to use this function monthly.
To adjust the rinse aid setting, open the rinse aid dispenser by turning its cap. Use a screwdriver or similar tool to adjust the dial to the desired level between 1 (low) and 6 (high). Close the dispenser cap securely.
Ensure that the rinse aid dispenser is filled and set to an appropriate level. Check that the water softener setting is correct for your water hardness. Avoid overloading the dishwasher and ensure that glassware is positioned securely.
Check for any items obstructing the spray arms and remove them. Ensure dishes and utensils are not touching each other. Verify that the dishwasher is level and the installation is secure. If noise persists, refer to the user manual.
Regularly clean the door seals, filters, and spray arms. Use the InnerClean function monthly. Check and refill the rinse aid and salt reservoirs as needed. Inspect and clean the drain hose and ensure proper water hardness settings.
To reset the dishwasher, press and hold the start button for a few seconds until the indicators on the control panel turn off. Release the button and wait a few moments before starting a new cycle.
Ensure that the rinse aid dispenser is filled. Select a drying option if available. Open the door slightly at the end of the cycle to allow moisture to escape. Avoid overloading and ensure dishes are properly spaced for air circulation.