Goji GTCHMBT19 Instruction Manual
![Goji GTCHMBT19 manual cover](/images/kebSfYypcYuPHcfEgSNVhdSc/thumbs/thumb175x175.webp)
To pair your Goji GTCHMBT19 headset, ensure it is in pairing mode by holding the power button until the LED indicator flashes. Then, enable Bluetooth on your device and select "Goji GTCHMBT19" from the list of available devices.
If your headset is not charging, first check the USB charging cable and port for any visible damage. Try using a different cable or port. Ensure the charging port on the headset is clean and free of debris.
To reset your Goji GTCHMBT19 headset, turn it off and then press and hold the power button for about 10 seconds until the LED flashes red and blue. This will reset the Bluetooth connection settings.
To clean your headset, use a soft, dry cloth to wipe the exterior surfaces. Avoid using any liquids or sprays. You can use a cotton swab to gently clean around the ear cushions and microphone area.
The Goji GTCHMBT19 headset provides up to 8 hours of continuous playback on a full charge. Battery life can vary based on usage and volume levels.
Yes, you can use the Goji GTCHMBT19 headset while it is charging. However, it is recommended to charge the headset when not in use to maximize battery lifespan.
To adjust the volume, use the volume up and down buttons located on the side of the headset. You can also adjust the volume directly from your connected device.
If your headset keeps disconnecting, ensure it is fully charged and within range of your Bluetooth device. Try resetting the headset and re-pairing it with your device. Also, check for any software updates on your device.
To control music playback, use the multifunction button on the headset. Press once to play/pause, double press to skip to the next track, and triple press to return to the previous track.
Yes, the Goji GTCHMBT19 headset is compatible with most voice assistants. To activate the voice assistant, press and hold the multifunction button until you hear a prompt.