Goji G4BOEBK13X Instruction Manual
![Goji G4BOEBK13X manual cover](/images/AXOZtrmtGSGprvBOGHoynQfX/thumbs/thumb175x175.webp)
To pair your Goji G4BOEBK13X headphones, turn on the headphones and ensure Bluetooth is enabled on your device. Press and hold the power button on the headphones until the LED indicator flashes blue and red, indicating pairing mode. Select "Goji G4BOEBK13X" from the list of available devices on your device to complete the pairing process.
If your Goji G4BOEBK13X headphones are not charging, first ensure the charging cable is properly connected to both the headphones and a power source. Try using a different cable or power source if the problem persists. Check for any debris in the charging port and clean it gently if necessary.
To reset your Goji G4BOEBK13X headphones, turn them off, then press and hold the power button for approximately 10 seconds until the LED indicator flashes purple. This will reset the headphones to factory settings.
Poor sound quality on your Goji G4BOEBK13X headphones may be due to a weak Bluetooth connection or interference. Ensure your device is within range and there are no obstructions. You can also try resetting the headphones or adjusting the audio settings on your device.
The Goji G4BOEBK13X headphones offer approximately 10 hours of playback time on a full charge. This may vary depending on usage and volume levels.
To clean your Goji G4BOEBK13X headphones, use a soft, dry cloth to gently wipe the surface. Avoid using liquid cleaners or submerging the headphones in water. For ear pads, a slightly damp cloth can be used to remove any buildup.
If your Goji G4BOEBK13X headphones frequently disconnect, ensure your device is within the Bluetooth range and that there is no interference. Restart both the headphones and your device, and try re-pairing them. Updating your device's Bluetooth drivers may also help.
To adjust the volume on your Goji G4BOEBK13X headphones, use the volume buttons located on the side of the headphones. Press the '+' button to increase the volume and the '-' button to decrease it.
Yes, you can use your Goji G4BOEBK13X headphones with non-Bluetooth devices using a 3.5mm audio cable if the headphones support wired connectivity. Simply connect one end of the cable to the headphones and the other to the device's headphone jack.
If one earbud of your Goji G4BOEBK13X headphones is not working, check the audio balance settings on your device to ensure it's not skewed to one side. If the issue persists, try resetting the headphones or inspecting for any physical damage.