Goji GLEDRVT17 Instruction Manual
![Goji GLEDRVT17 manual cover](/images/WvRiydSfEekfnJVUaPBYpKGN/thumbs/thumb175x175.webp)
To turn on the Goji GLEDRVT17 Vest, press and hold the power button located on the left side of the vest for three seconds until the LED indicator lights up.
To clean the vest, detach the battery pack and hand wash the vest in cold water. Do not bleach or tumble dry. Lay flat to dry.
Press the power button briefly to cycle through the heat settings: low, medium, and high. The LED indicator will change color to reflect the current setting.
Ensure the battery is fully charged and properly connected to the vest. Check if the power button is turned on and the LED indicator is lit. If the problem persists, consult the troubleshooting section of the user manual.
On a full charge, the battery lasts approximately 8 hours on low heat, 5 hours on medium heat, and 3 hours on high heat.
It is recommended to use the USB cable provided with the vest to ensure optimal charging performance. Using a different cable may result in slower charging times.
A flashing red LED indicates a low battery. Recharge the battery pack using the supplied charger until the LED changes to a solid color.
The vest is water-resistant but not waterproof. It can withstand light rain, but avoid submerging it in water or exposing it to heavy rainfall.
Ensure the vest is completely dry before storing. Disconnect the battery, fold the vest neatly, and place it in a cool, dry place away from direct sunlight.
First, check the battery connection and ensure it is charged. If the problem persists, consult the troubleshooting guide or contact customer support for further assistance.