Goji GKIDINB19 Operations Manual
![Goji GKIDINB19 Operations manual cover](/images/FaoLnBiADlJxyaInemjZJdAB/thumbs/thumb175x175.webp)
To pair your Goji GKIDINB19 Operations Headphones, turn on the headphones and ensure they are in pairing mode. Go to the Bluetooth settings on your device, search for new devices, and select 'Goji GKIDINB19' from the list.
If your headphones are not charging, ensure the charging cable is properly connected to the headphones and the power source. Try using a different cable or charger if available, and check the charging port for any debris or damage.
To reset your Goji headphones, turn them off and hold the power button for approximately 10 seconds until the LED indicator flashes, indicating a reset.
The Goji GKIDINB19 headphones typically offer up to 10 hours of playback time on a full charge.
To clean your headphones, use a soft, dry cloth to wipe the exterior. Avoid using any liquids. For the ear pads, gently wipe with a damp cloth if necessary, and let them dry completely before use.
Poor sound quality can be caused by a weak Bluetooth connection or interference. Ensure your device is within range and that no obstacles are blocking the connection. Check the audio settings on your device and adjust as needed.
When in pairing mode, the LED indicator on the headphones will flash blue and red alternately.
Yes, you can use your Goji GKIDINB19 headphones while they are charging, but it may affect the charging time.
If your headphones are not connecting, ensure they are in pairing mode and that Bluetooth is enabled on your device. Try restarting both the headphones and your device, and attempt to pair again.
To improve Bluetooth connection range, ensure there are no physical obstructions between the headphones and the device. Keep the device and headphones within the optimal range, typically up to 10 meters for best performance.