Goji GCDABN14 Instruction Manual

To set up the Goji GCDABN14 Radio, plug it into a power source, extend the antenna for better reception, and press the power button. Use the tuning dial to find your desired radio station.
Ensure the antenna is fully extended and reposition it for optimal reception. Try moving the radio to a higher location or near a window to reduce interference.
Check the power connection and ensure the outlet is working. If using batteries, confirm they are inserted correctly and have sufficient charge.
To preset a station, tune to your desired frequency, press and hold the preset button until you hear a beep, then assign it to a preset number using the number buttons.
Use a soft, dry cloth to wipe down the exterior. Avoid using liquids or abrasive cleaners. Regularly check the antenna and connections for dust build-up.
Locate the reset button, usually found on the back or bottom of the device. Use a pointed object to press and hold the button for about 10 seconds.
Interference can be caused by other electronic devices. Try turning off nearby electronics, changing the radio's location, or adjusting the antenna.
Yes, the Goji GCDABN14 typically has an audio output jack. Use an appropriate audio cable to connect external speakers for improved sound quality.
Press the time set button, then use the tuning dial to adjust the hour and minute. Confirm the settings by pressing the time set button again.
Try a soft reset by unplugging the radio for a few minutes, then plugging it back in. If the problem persists, check for any physical obstructions or damage to the buttons.