GE XPIOX3BCBT Owner's Manual
![GE XPIOX3BCBT Ice Maker manual cover](/images/dJEwNmrOMdqemueiVDAWJJWu/thumbs/thumb175x175.webp)
To clean the GE XPIOX3BCBT Ice Maker, unplug the unit, remove all ice, and use a mixture of mild detergent and warm water to wipe the interior. Rinse thoroughly with clean water and dry with a soft cloth.
First, ensure the unit is plugged in and turned on. Check the water supply is connected properly. If the issue persists, refer to the troubleshooting section of the user manual or contact GE support.
Ensure the ice maker is in a well-ventilated area and not exposed to direct sunlight. Regularly clean the unit and make sure the water filter is replaced as needed.
It is recommended to change the water filter every six months or when you notice a decrease in ice quality or production.
Use potable water with a hardness of less than 200 ppm. Avoid using distilled or softened water as it may affect ice production.
Some noise is normal during ice production. However, if you hear unusual sounds, check for obstructions or loose parts. If noises persist, consult a professional technician.
To reset the ice maker, unplug the unit for 10 minutes, then plug it back in and turn it on. This can help resolve minor issues.
The GE XPIOX3BCBT Ice Maker is designed for indoor use only. Using it outdoors can affect its performance and void the warranty.
Check the water supply line for any restrictions. Ensure the unit is level and not tilted, as this can affect ice size.
Clean and dry the unit thoroughly. Store it in a cool, dry place away from direct sunlight. Make sure to leave the door slightly ajar to prevent odors.