GE GDT225-226 GDT225SGLBB Owner's Manual

Ensure dishes are loaded with soiled surfaces facing the water spray. Avoid blocking spray arms and place larger items on the sides. Use the top rack for glasses and smaller items.
Check the drain hose for kinks or clogs, ensure the sink's drain is clear, and clean the dishwasher's filter. If the problem persists, inspect the air gap or contact GE service.
Remove the lower dish rack, locate the filter at the bottom of the dishwasher, twist it counterclockwise to remove, and rinse it under running water. Reinstall by twisting it clockwise.
Ensure the door is fully closed and latched, check the control lock feature isn't activated, and verify the dishwasher is properly connected to power.
Perform a monthly cleaning of the filter, wipe down the door seals, and run an empty cycle with a dishwasher cleaner every three months to maintain performance.
Ensure the use of a high-quality detergent and rinse aid. Check water temperature to be at least 120°F and avoid overloading the dishwasher.
Yes, but place them on the upper rack to avoid heat damage. Ensure items are dishwasher-safe to prevent warping or melting.
Check for any loose items or utensils that may be rattling. Inspect the spray arms for obstructions and ensure the dishwasher is level.
Use a rinse aid, select a heated drying option, and slightly open the dishwasher door after the cycle to allow steam to escape.
The sanitize cycle increases water temperature to eliminate 99.999% of bacteria on dishes, ensuring a more hygienic clean.