GE PGB965 PGB965BPTS Owner's Manual
![GE PGB965 PGB965BPTS Range manual cover](/images/hLvPVGLFxysJCorzxjDPyVgm/thumbs/thumb175x175.webp)
To clean the oven interior, use a mixture of baking soda and water to form a paste. Apply the paste to the interior surfaces and let it sit overnight. Wipe off with a damp cloth the next day. Avoid using abrasive cleaners that could damage the surface.
Ensure the oven is properly connected to the power supply. Check if the circuit breaker is tripped. If the issue persists, the heating element might be faulty and should be inspected or replaced by a professional technician.
Press the 'Clock' button, then use the 'Up' and 'Down' arrows to set the correct time. Press the 'Clock' button again to confirm and save the setting.
Check if the burner cap is properly aligned on the burner base. Ensure the burner ports are not clogged. If the igniter is clicking but not igniting, it might need cleaning or replacement.
To convert the range, you need a conversion kit specific to the model. Follow the instructions in the conversion kit carefully, and it’s advisable to have a certified technician perform the conversion to ensure safety and compliance with local regulations.
Regularly clean the burners, oven interior, and control knobs. Check for any gas leaks or unusual odors. Inspect the oven door gasket for wear and tear to ensure a proper seal.
First, ensure the oven is not in self-cleaning mode, which disables the light. Check if the bulb needs replacing. If the new bulb doesn’t work, inspect the light switch or contacts for faults.
Try resetting the range by turning off the power for a few minutes. If the control panel remains unresponsive, there might be an issue with the control board that requires professional inspection.
Use cookware that is appropriately sized for the burners to minimize spills. Clean any spills immediately with a damp cloth to prevent them from burning onto the surface.
Yes, you can activate the control lock feature by pressing and holding the 'Lock Controls' button for a few seconds until a lock icon appears on the display. To unlock, repeat the process.