Ford Transit Connect 2015 Owner's Manual

The recommended oil type for a 2015 Ford Transit Connect is 5W-20 synthetic blend motor oil.
To reset the oil change light, turn the ignition to the "On" position without starting the engine. Press the brake and gas pedals simultaneously for approximately 25 seconds until the oil change light flashes and resets.
The 2015 Ford Transit Connect has a towing capacity of up to 2,000 pounds when properly equipped.
To replace the cabin air filter, open the glove compartment, remove the stops on each side, and lower the glove box. The cabin air filter is located behind the glove box. Remove the old filter and insert a new one.
Common transmission issues include rough shifting, slipping gears, and transmission fluid leaks. Regular maintenance and timely fluid changes can help mitigate these issues.
To jump-start, connect the positive cable to the positive terminal of the dead battery, then to the positive terminal of the booster vehicle. Connect the negative cable to the negative terminal of the booster battery, and then to a ground point on the dead vehicle, such as a metal bolt. Start the booster vehicle, then start the Transit Connect.
The recommended tire pressure for the 2015 Ford Transit Connect is typically 35 PSI for both front and rear tires. Check the vehicle's placard or owner's manual for specific values.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the power connector, and then the bulb cover. Twist and remove the old bulb. Insert the new bulb, replace the cover, and reconnect the power.
Follow the maintenance schedule in the owner's manual, which typically includes oil changes every 7,500 miles, tire rotations every 10,000 miles, and brake inspections every 20,000 miles. Regular checks of fluid levels and filters are also recommended.
First, check the refrigerant level and refill if necessary. Inspect the cabin air filter for clogs and replace if dirty. Ensure the AC compressor is engaging and that there are no blown fuses. If the issue persists, a professional diagnostic may be needed.