Ford Transit Connect 2014 Owner's Manual

The recommended oil type is 5W-20 synthetic blend motor oil for optimal performance and fuel efficiency.
To reset the oil change light, turn the ignition to the 'on' position without starting the engine, then press and hold the gas and brake pedals simultaneously until the "Service: Oil Reset in Progress" message appears and disappears.
Common causes include low coolant levels, a malfunctioning thermostat, a failed water pump, or a clogged radiator.
To change the air filter, locate the air filter housing in the engine bay, unclip the cover, remove the old filter, and replace it with a new one, ensuring it is seated correctly before reattaching the cover.
The towing capacity of the 2014 Ford Transit Connect is up to 2,000 pounds when properly equipped with the factory towing package.
Improving fuel efficiency can be achieved by maintaining proper tire pressure, reducing excess weight, performing regular maintenance, and driving smoothly without sudden accelerations or decelerations.
If the transmission is slipping, check the transmission fluid level and condition. If low or dirty, change or top up the fluid. If the issue persists, consult a professional mechanic for further diagnosis.
It is recommended to rotate the tires every 5,000 to 7,500 miles to ensure even tire wear and extend the lifespan of the tires.
The correct tire pressure for the 2014 Ford Transit Connect is typically 35 PSI for the front tires and 40 PSI for the rear tires. Always refer to the placard on the driver's side door jamb for the most accurate information.
To connect your smartphone, ensure Bluetooth is enabled on your phone, press the phone button on the van's audio system, select 'Add Device', and follow the prompts to pair your phone using the displayed PIN.