Ford Ranger 2021 Owner's Manual
![Ford Ranger 2021 manual cover](/images/dwuaoSadBrhOFGDwIVdbkvMa/thumbs/thumb175x175.webp)
To reset the oil change light, turn the ignition to the "on" position without starting the engine. Press the accelerator pedal three times within 10 seconds. Turn off the ignition and then start the engine to confirm the reset.
Ford recommends using SAE 5W-30 synthetic blend motor oil for the 2021 Ford Ranger. Always check your owner's manual for the most accurate information.
To improve fuel efficiency, ensure regular maintenance such as oil changes and air filter replacements, maintain proper tire pressure, avoid excessive idling, and drive at a steady speed.
A squealing noise on startup is often due to a worn or loose serpentine belt. Inspect the belt for wear and tension, and replace or adjust as necessary.
To pair your phone with Ford SYNC, enable Bluetooth on your phone. On the SYNC screen, select 'Phone' > 'Add Phone'. Follow the prompts to connect and enter the PIN if required.
The recommended tire pressure for the 2021 Ford Ranger is typically 30-35 psi. Refer to the placard on the driver's side door jamb for exact specifications.
To engage 4WD, turn the drive mode selector to 4H (4 High) or 4L (4 Low) while the vehicle is in neutral and moving at a low speed. Refer to the owner’s manual for specific instructions.
The 2021 Ford Ranger has a towing capacity of up to 7,500 pounds when properly equipped with the towing package.
It is recommended to replace the air filter every 15,000 to 30,000 miles, depending on driving conditions. Check your owner's manual for specific guidance.
Common causes for a check engine light include a loose gas cap, faulty oxygen sensor, or a malfunctioning catalytic converter. It is advised to have the vehicle diagnosed by a professional.