Ford Police Interceptor 2015 Owner's Manual
![Ford Police Interceptor Sedan 2015 manual cover](/images/aBwQAFMOVJEzEEkpkqLftCqI/thumbs/thumb175x175.webp)
The 2015 Ford Police Interceptor Sedan typically requires 5W-20 synthetic blend motor oil. Always refer to the owner's manual for confirmation.
To reset the oil change light, turn the ignition to the 'ON' position without starting the engine. Press the gas and brake pedals at the same time for about 20 seconds until the display shows "Service: Oil Reset Complete."
The recommended tire pressure for the 2015 Ford Police Interceptor Sedan is usually 35 PSI for all four tires. Check the driver's side door placard for specific information.
To replace the cabin air filter, open the glove compartment, disconnect the dampener arm, and push in the sides to drop it down. Access the filter cover panel behind and replace the filter.
Overheating could be due to a variety of issues, including low coolant levels, a faulty thermostat, or a malfunctioning radiator fan. A diagnostic check is recommended.
Insert the existing key into the ignition and turn it to 'ON'. Then, turn it 'OFF' and remove it. Insert the new key and turn it 'ON'. The new key should now be programmed.
The 2015 Ford Police Interceptor Sedan has a towing capacity of up to 2,000 lbs when properly equipped. Ensure that towing components meet specifications.
Improving fuel efficiency can be achieved by maintaining proper tire pressure, regular oil changes, and avoiding excessive idling. Driving at steady speeds also helps.
Use an OBD-II scanner to read the error codes from the vehicle's computer. The codes will help diagnose the issue. Consult a professional mechanic if needed.
Some drivers report issues such as hard shifting or slipping. Regular transmission fluid checks and timely maintenance can mitigate these issues.