Ford Mustang 2014 Owner's Manual
![Ford Mustang 2014 manual cover](/images/dfpsdxuoVkJjdvdSWXoYmbek/thumbs/thumb175x175.webp)
Ford recommends using 5W-20 synthetic blend motor oil for the 2014 Mustang. It's important to check your owner's manual for any specific requirements based on your engine type.
To reset the oil change light, turn the ignition to the 'on' position without starting the engine. Press the 'reset' button on the dashboard until the 'oil life' option appears, then hold the 'reset' button until the oil life resets to 100%.
The recommended tire pressure for the 2014 Ford Mustang is typically 32 PSI for both front and rear tires. Always refer to the sticker inside the driver’s side door jamb for the most accurate information.
To improve fuel efficiency, ensure regular maintenance like oil changes and air filter replacements, maintain proper tire pressure, drive at consistent speeds, and avoid rapid acceleration and hard braking.
First, check the AC fuse and relay to ensure they are not blown. Inspect the AC compressor for any visible damage or leaks. If these appear fine, it's advisable to have a professional check for refrigerant levels and potential leaks.
Common causes of engine misfires include faulty spark plugs, clogged fuel injectors, or a malfunctioning ignition coil. Regular maintenance and timely replacement of these components can prevent most issues.
Ford typically recommends changing the transmission fluid every 30,000 to 60,000 miles. Check your owner's manual for specific intervals based on your driving conditions and habits.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the electrical connector, turn the bulb counterclockwise to remove, and replace it with a new bulb. Reattach the connector and ensure it's secure.
If the check engine light comes on, check for any obvious issues like a loose gas cap. If nothing is apparent, use an OBD-II scanner to read the diagnostic trouble codes or visit a mechanic for a professional diagnosis.
To pair your phone, enable Bluetooth on your device, then use the Mustang's dashboard menu to select 'Add Device'. Follow the prompts to pair, entering the provided PIN if necessary. Ensure your phone is discoverable during the process.