Ford Fusion 2018 Owner's Manual
![Ford Fusion 2018 manual cover](/images/hUKEqJGUEHLPTCvPUjMngmng/thumbs/thumb175x175.webp)
The 2018 Ford Fusion typically requires 5W-20 synthetic blend motor oil. However, always check your owner's manual for the manufacturer's recommendation.
To reset the oil change light, turn the ignition to the "on" position without starting the engine. Press the gas and brake pedals simultaneously for about 25 seconds until the "Service: Oil Reset Complete" message appears.
The recommended tire pressure for the 2018 Ford Fusion is typically 32 psi for both front and rear tires. Check the sticker on the driver’s side door jamb for specific information.
Activate Bluetooth on your phone, then go to the SYNC menu on your car's display. Select 'Add a Device', and choose your phone from the list. Follow the prompts to complete pairing.
The check engine light can be triggered by various issues, such as a loose gas cap, a malfunctioning oxygen sensor, or engine misfiring. It is advisable to have the vehicle scanned for diagnostic codes.
It is recommended to check the air filter every 15,000 to 30,000 miles. Replace it if it appears dirty or clogged to ensure optimal engine performance and fuel efficiency.
Check for any lights or accessories left on that may drain the battery. If the issue persists, have the battery and alternator tested for faults, and ensure all connections are secure.
To enable or disable MyKey, insert the admin key, turn on the ignition, and access the main menu on the display. Navigate to 'Settings', then 'MyKey', and follow the prompts to configure your settings.
Regular maintenance includes oil changes every 7,500 miles, tire rotations every 10,000 miles, and brake inspections every 20,000 miles. Always refer to the owner’s manual for detailed schedules.
To improve fuel efficiency, maintain proper tire pressure, use the recommended motor oil, drive at steady speeds, and avoid excessive idling. Regular maintenance also plays a key role.